Komet Concorde

The Concorde's front control panel is simple and intuitive. Volume followed by a standard 3-band EQ, a presence control as well as a high cut control. The high cut control operates within the power section of the amplifier and thus allows the user to darken and shape the overall tone of the amplifier without affecting the equalization of the preamp section. This solves the common problem of the loss of gain and clarity when turning the treble control down in the preamp.

SUPERSONIC PLAYABILITY

Besides its higher gain, other distinguishing features compared to the Komet® 60 are: a circuit which is designed to exclusively operate with EL34 power tubes, solid state rectification for a quicker and punchier response and a tighter and more modern sounding bottom end. Expect rich, complex harmonics, creamy rhythms and singing leads — all reinforced with a well focused EQ. The Concorde follows the Komet® tradition of creating an amplifier with rich, balanced sound and unmatched musicality - including superb touch sensitivity, note articulation, string to string separation and dynamic response.

The bias control dial is a precision, 10-turn dial with a scale from 1 to 10. A brake lever locks your setting in place. The bias control system allows the user to easily set the amplifier's bias between different sets of power tubes, and precisely dial in the power tube's bias with a digital volt meter.

Also on the back control panel you will find The Touch Response switch. This Trainwreck Engineered™ circuit enables the musician to alter the amplifier's touch response characteristics to suit their playing style. A simple flip of the switch allows the player to choose between a fast, or a gradual response to one's picking dynamics and guitar's volume control settings. The Touch Response circuit is not an extra gain stage or gain boost circuit. Instead it works by magnifying subtle changes in pick or finger attack along with subtle changes in guitar volume. This circuit allows those players who prefer clean tones to run the full range of dynamics without breaking into unwanted distortion. A blues player can play on the edge of distortion easily going from clean to blues overdrive using pick attack as the controlling factor. An over the top player can go from clean to scorch using the fast setting. The slightest change in pick attack or guitar volume setting will translate into huge changes in dynamics and power. To sum up, the Touch Response circuit lets you choose the response and feel you want and makes your amplifier capable of playing every style of music.